Table of Contents
Advertisement
7462
High capacity input tray (HCIT) cover, right removal
Note: Carefully remove the base machine from the HCIT tray assembly before proceeding.
Note: Before removing the HCIT right cover, first remove the right side anti-tip latch assembly. See
capacity input tray (HCIT) anti-tip latch assembly removal" on page
1. Remove the High capacity input tray (HCIT) cover, rear. See
removal" on page
2. Remove the six screws (A) securing the HCIT cover, right to the drawer.
3. Use a screwdriver to gently pry up on the tabs (B).
4-162
Service Manual
4-160.
A
4-165.
"High capacity input tray (HCIT) cover, rear
A
B
Previous
"High
Next
Go Back
Advertisement
Table of Contents
