Laser Unit Assembly (Printhead) Removal - Lexmark X500n Service Manual

7100-XXX

Laser unit assembly (printhead) removal

1. Open the front cover.
2. Remove the toner cartridges.
3. Remove the photodeveloper cartridge. See
4. Open the top cover assembly.
5. Remove the two screws (A) from the laser unit assembly cover. The photograph below is looking
through the opening in the top cover assembly.
6. Unlatch and remove the laser unit assembly cover.
4-18
Service Manual
"Photodeveloper cartridge removal" on page
A
4-8.