Table of Contents
Advertisement
CHAPTER 4.
Option Card Installation
Chapter4 describes how to install module and internal option card.
Safety Recommendations
Inspect the shipping carton for damage. If a module is defective, contact
Samsung. Save the original shipping carton and packing material in case you
need to return the equipment to Samsung Electronics.
Class 1 Laser Product
The iBG3026 uses laser transceiver Small Form Pluggable (SFP) modules on
some ports.
© SAMSUNG Electronics Co., Ltd.
Module and Internal
Electric hazard exists. Verify the power is turned off. Do not work on
energized equipment. Working on energized equipment can result in
serious electrical shock.
To avoid electric shock, do not connect safety extra-low voltage (SELV)
circuits (as found in LAN ports) to telephone-network voltage (TNV)
circuits (as found in WAN ports).
This equipment must be installed and maintained by properly trained
service personnel. Make sure the proper electrical service is available
before plugging this unit in and turning it on.
Disconnect the telecommunications lines before unplugging the main
power connector.
Ubigate iBG3026 Installation Manual
35
Advertisement
Table of Contents
