Table of Contents
Advertisement
Ubigate iBG3026 Installation Manual/Ed.01
Caution
CAUTION
As a general safety precaution, be sure to provide DC power through
a circuit breaker on the equipment rack.
Do not place any items that weigh more than 4.5 kg on top of the
chassis, and do not stack routers on a desktop.
This equipment must be installed and maintained by properly trained
service personnel. Make sure the proper electrical service is available
before plugging this unit in and turning it on. Disconnect the
telecommunications lines before unplugging the main power connector.
Practice good safety habits. Use two people to mount the router into a
rack.
To comply with the Telcordia GR-1089 NEBS standard for
electromagnetic compatibility and safety, connect only to intra-building
or non-exposed wiring or cabling.
SFPs include a laser transceiver on the fiber-optic uplink port.
Use of controls or adjustments of performance or procedures other
than those specified in this manual may result in hazardous radiation
exposure.
To prevent damage to the iBG3026, do not remove a Compact Flash
memory card from the chassis while it is being accessed (when the
CF LED is blinking).
XV
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
