Table of Contents
Advertisement
CHAPTER 2.
Requirements
Chapter2 describes how to prepare your site for an iBG3026 router.
This chapter describes how to prepare your site for an iBG3026 router.
Before you install an iBG3026 router, familiarize yourself with the network
interface, power, and ground connections described in the following
paragraphs.
Safety Recommendations
The safety warnings that appear in this document (such as the one below)
indicate a procedure that can harm you if not done correctly.
© SAMSUNG Electronics Co., Ltd.
Pre-Installation
Electric hazard exists. Verify the power is turned off. Do not work on
energized equipment. Working on energized equipment can result in
serious electrical shock.
To avoid electric shock, do not connect Safety Extra-Low Voltage
(SELV) circuits (as found in LAN ports) to Telephone-Network Voltage
(TNV) circuits (as found in WAN ports).
This equipment must be installed and maintained by properly trained
service personnel. Make sure the proper electrical service is available
before plugging this unit in and turning it on. Disconnect the
telecommunication lines before unplugging the main power connector.
Ubigate iBG3026 Installation Manual
11
Advertisement
Table of Contents
