DCS Gateway
Internal Calls
Making An Internal Call
• Dial the extension number or group number.
OR
• Press a Direct Station Select
Wait for the party to answer. If you hear a brief tone burst in-
stead of ring-back tone, the extension you called is set for
Voice Announce or Auto Answer. Begin speaking immediately
after the tone.
• Finish the call by replacing the handset or pressing the
key.
ANS/RLS
Answering An Internal Call
• Lift the handset or press the
key.
SPEAKER
• To finish the call, replace the handset or press the
key.
Auto Answer Mode
When another extension calls you, your keyset will sound a
brief attention tone and then automatically answer the call.
Your microphone and speaker are turned on and you can speak
hands-free. For privacy, use the handset.
To finish the call, replace the handset or press the
key.
key.
(DSS)
ANS/RLS
— 13 —
Keyset User Guide
key or press the
ANS/RLS
ANS/RLS