CHAPTER 5. Components Installation
Installing DDR SDRAM SODIMM
DDR SDRAM SODIMM modules are sensitive to Electrostatic Discharge
Damage (ESD), which can occur when electronic cards or components are
handled improperly, resulting in complete or intermittent failures.
To Install DDR SDRAM SODIMM
The memory module for the iBG3026 is located on the system board.
1.
Pull the main module straight out of the slot bay. The SODIMM slot
location is shown under internal option cards if any.
2.
Orient the DDR SDRAM SODIMM polarization notch with the
SODIMM connector on the system board.
3.
Press the SODIMM into the slot making sure it is fully seated (the slot
latches will engage the SODIMM.
4.
Replace the main module.
5.
Verify that the memory is recognized by the system.
86
Figure 5.9 Removing a DDR SDRAM SODIMM module
© SAMSUNG Electronics Co., Ltd.