General Site Requirements
Site Preparation
Before installing an iBG3026 router, ensure that the site conditions comply
with the following requirements and that the mounting equipment, tools, and
cables are available at the designated site.
For safety, Ubigate iBG3026 is intended to be installed in restricted access
location by service person.
See Required Tools and Materials for information about tools and materials
required for installation.
Environment
Site location is important for the proper operation of iBG3026 router.
Place the unit in a clean, dry environment with adequate air circulation.
Allow two to three feet additional clearance around the router for access to the
cable connectors on the front and rear panels.
All iBG3026 routers meet Networking Equipment Building Structure (NEBS)
environmental requirements. The selected installation site must meet basic
environmental requirements.
The following figure shows a top view of the path of cooling air through the
chassis. Clearance must be maintained near the air intake and exhaust vents to
prevent over-temperature conditions, which could result in router failure or
performance degradation.
© SAMSUNG Electronics Co., Ltd.
Figure 2.1 Air flow of the iBG3026
Ubigate iBG3026 Installation Manual/Ed.01
15