Table of Contents
Advertisement
SAFETY CONCERNS
Warning
XIV
WARNING
Electric hazard exists. Verify the power is turned off. Do not work on
energized equipment. Working on energized equipment can result in
serious electrical shock.
Invisible laser radiation may be emitted from disconnected fibers or
connectors.
Do not stare into beams or view directly with optical instruments.
Laser radiation and EMI are present when the router cover panel is
open.
To avoid electric shock, do not connect safety extra-low voltage
(SELV) circuits (as found in LAN ports) to telephone-network voltage
(TNV) circuits (as found in WAN ports).
When handling iBG3026 components, wear grounding wrist straps to
avoid ESD damage to the card. Do not directly touch the backplane
with your hand or any metal tool, or you could shock yourself.
AC power to the iBG3026 router is double fused. Fuses are installed
on both line and neutral conductors.
A neutral fuse failure may present a hazard to service personnel.
Disconnect the AC Line Cord or remove both AC fuses before
servicing the unit.
When you connect DC power to the Ubigate iBG3026, disconnect all
power sources before servicing.
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
