Table of Contents
Advertisement
CHAPTER 4. Module and Internal Option Card Installation
Installing SFP Modules
To install SFP module to the iBG3026 chassis:
1.
Insert SFP module into the module bay which you plan to install the
module.
2.
Remove the SFP module cap.
3.
Connect the optical cable to the SFP module.
To remove SFP modules:
1.
Disconnect the optical cable.
2.
Pull the handle down
3.
Pull the module straight out of the module bay.
4.
Cover the SFP module cap.
78
Figure 4.61 Installing SFP Modules
Figure 4.62 Removing SFP Modules
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
