Table of Contents
Advertisement
CHAPTER 3. Router Installation
Rack Mount Installation
iBG3026 router can be mounted in a 19-inch (48.26 cm) equipment rack using
the brackets shown in the following figures.
Bracket pair for 19-inch rack
When rack-mounting an iBG3026 router, additional empty vertical space is
required to satisfy NEBS requirements for dissipated heat. Multiple iBG3026
routers may be mounted in the same rack without an air gap between the units,
and they can be intermingled with other iBG3026 products or other vendor
equipment. However, the cumulative required empty space for the number of
iBG3026 routers mounted in a rack must be accounted for in that rack.
This required empty space can be all above, all below, or a combination of
above and below the installed router (s).
20
Figure 3.1 Mounting Brackets
Other vendor equipment installed in the same rack may have a similar
requirement, and if so, those space requirements must be added to
the space requirements for the iBG3026 router (s)
Bracket pair for 23-inch rack
© SAMSUNG Electronics Co., Ltd.
Advertisement
Table of Contents
