Figure 76 Multilink Trunk Configuration Screen - Nortel business policy switch 2000 User Manual

Any mix of up to eight Business Policy Switches and BayStack 450 and BayStack
410 switches can be stacked to provide a total of 224 ports (when all MDA slots
are configured with the maximum port availability). See Appendix B, for more
information about a mixed stack configuration.
When the trunks are enabled, the trunk members take on default settings necessary
for correct operation of the MultiLink Trunking feature. These default settings can
affect the correct operation of your configured network. If you disable a trunk, you
may need to reconfigure the specific trunk members switch ports to return to the
previous switch configuration. See Chapter 1 for more information.
To open the MultiLink Trunk Configuration screen:
➨
Choose Trunk Configuration (or press t) from the MultiLink Trunk
Configuration Menu screen.

Figure 76 MultiLink Trunk Configuration screen

Trunk Trunk Members (Unit/Port)
----- ----------------------------- ------------ ---------------------------
1 [ / ][
2 [ / ][
3 [ / ][
4 [ / ][
5 [ / ][
6 [ / ][
Trunk Trunk Name
----- ------------------
1 [ Trunk #1 ]
2 [ Trunk #2 ]
3 [ Trunk #3 ]
4 [ Trunk #4 ]
5 [ Trunk #5 ]
6 [ Trunk #6 ]
Use space bar to display choices, press <Return> or <Enter> to select
choice. Press Ctrl-R to return to previous menu.
Main Menu.
MultiLink Trunk Configuration
/ ][ / ][ / ] [ Normal
/ ][ / ][ / ] [ Normal
/ ][ / ][ / ] [ Normal
/ ][ / ][ / ] [ Normal
/ ][ / ][ / ] [ Normal
/ ][ / ][ / ] [ Normal
Chapter 3 Using the console interface 217
STP Learning Trunk Mode
]
]
]
]
]
]
Press Ctrl-C to return to
Using the Business Policy Switch 2000 Version 2.0
Trunk Status
Basic [Disabled ]
Basic [Disabled ]
Basic [Disabled ]
Basic [Disabled ]
Basic [Disabled ]
Basic [Disabled ]