Table of Contents
Advertisement
162 Chapter 3 Using the console interface
IP Configuration/Setup screen
The IP Configuration/Setup screen
Business Policy Switch IP configuration parameters. Data that you enter in the
user-configurable fields takes effect as soon as you press [Enter].
To open the IP Configuration/Setup screen:
➨
Choose IP Configuration/Setup (or press i) from the main menu.
Figure 53 IP Configuration/Setup screen
In-Band Stack IP Address:
In-Band Switch IP Address: [10.30.31.106]
In-Band Subnet Mask:
Default Gateway:
IP Address to Ping:
Start Ping:
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Table 11
208700-C
IP Configuration/Setup
Unit [ 1
BootP Request Mode:
Configurable
---------------
[10.30.31.108]
[255.255.255.0]
[ 0.0.0.0 ]
[ 0.0.0.0 ]
[ No ]
describes the IP Configuration/Setup screen fields.
Note: The read-only fields in this screen are updated based on the BootP
mode specified in the BootP Request Mode field. (See
BootP request
mode" on
(Figure
53) allows you to set or modify the
]
[ BootP When Needed
In Use
------------
10.30.31.108
255.255.255.0
0.0.0.0
Press Ctrl-C to return to Main Menu.
page 164
for more information.)
]
Last BootP
---------------
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
"Choosing a
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
