Snmp Configuration Screen; Figure 54 Snmp Configuration Screen - Nortel business policy switch 2000 User Manual

SNMP Configuration screen

The SNMP Configuration screen
SNMP configuration parameters.
To open the SNMP Configuration screen:
➨
Choose SNMP Configuration (or press m) from the main menu.

Figure 54 SNMP Configuration screen

Read-Only Community String:
Read-Write Community String:
Trap #1 IP Address:
Community String:
Trap #2 IP Address:
Community String:
Trap #3 IP Address:
Community String:
Trap #4 IP Address:
Community String:
Authentication Trap:
AutoTopology:
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.
Chapter 3 Using the console interface 167
(Figure 54) allows you to set or modify the
SNMP Configuration
[ public ]
[ private ]
[ 0.0.0.0 ]
[ ]
[ 0.0.0.0 ]
[ ]
[ 0.0.0.0 ]
[ ]
[ 0.0.0.0 ]
[ ]
[ Enabled ]
[ Enabled ]
Press Ctrl-C to return to Main Menu.
Using the Business Policy Switch 2000 Version 2.0