Figure 92 Spanning Tree Port Configuration - Nortel business policy switch 2000 User Manual

254 Chapter 3 Using the console interface
The Spanning Tree Port Configuration screen allows you to set the STG
participation for each switch port or all ports and to display spanning tree settings
for individual switch ports or all switch ports.
Figure 92
Configuration screens.
➨
Choose Spanning Tree Port Configuration (or press c) from the Spanning Tree
Configuration Menu to open the Spanning Tree Port Configuration screen.

Figure 92 Spanning Tree Port Configuration

STP Group:
Port Trunk
---- -----
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Press Ctrl-N to display choices for additional ports.
Use space bar to display choices, press <Return> or <Enter> to select
choice. Press Ctrl-R to return to previous menu.
to Main Menu.
208700-C
Note: If spanning tree participation of any trunk member is changed
(enabled or disabled), the spanning tree participation of all members of
that trunk is changed similarly.
shows sample port displays for the two Spanning Tree Port
Spanning Tree Port Configuration
[ 1 ]
Participation
-------------------
[ Normal Learning ]
[ Normal Learning ]
[ Normal Learning ]
[ Normal Learning ]
[ Normal Learning ]
[ Normal Learning ]
[ Normal Learning ]
[ Normal Learning ]
[ Normal Learning ]
[ Normal Learning ]
[ Normal Learning ]
[ Normal Learning ]
[ Normal Learning ]
[ Normal Learning ]
Unit: [ 1 ]
Priority Path Cost
-------- ---------
128 10
128 10
128 10
128 10
128 10
128 10
128 10
128 10
128 10
128 10
128 10
128 10
128 10
128 10
Press Ctrl-C to return
State
----------
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
More...