Nortel business policy switch 2000 User Manual page 310

310 Chapter 5 Sample QoS configuration
With software version 2.0, you can easily configure QoS parameters using the
QoS Quick Config Web pages. QoS Quick Config allows you to configure
multiple QoS components using only two Web pages. Although QoS Quick config
does not provide the full range of options as the QoS Advanced Pages, Quick
Config is suitable for many QoS applications.
Refer to Using Web-based Management for the Business Policy Switch 2000
Software Version 2.0 for sample QoS Wizard and QoS Quick Config
configurations.
It is important that you refer to Using Web-based Management for the Business
Policy Switch 2000 Software Version 2.0 for details to access the Web-based
management interface, directory and page navigation information, and field
descriptions
This chapter provides a sample configuration using the Web-based management
interface QoS > QoS Advanced Web pages. You must define filters before you
define filter groups, and you must define actions before you define the meters. The
policy must be defined last, after the other parameters are configured. This chapter
covers the following topics, using the QoS Advanced Web pages:
• "Creating interface
• "Accepting default mapping values" on page 315
• "Setting up filters and filter groups" on page 315
• "Configuring actions" on page 328
• "Configuring meters" on page 331
• "Configuring shapers" on page 334
• "Configuring policies" on page 336
• "Assigning mapping values" on page 341
208700-C
Note: Nortel Networks recommends that you configure filter and
interface parameters in the order in which the screens are presented in
this example.
groups," next