Nortel business policy switch 2000 User Manual page 264

264 Chapter 3 Using the console interface
Table 49 TELNET/SNMP/Web Access Configuration screen fields (continued)
Field Description
TELNET Access Specifies if Telnet access is allowed and only to those on the list.
Default Value:
Range:
SNMP Access Specifies if SNMP access is allowed and only to those on the list. (SNMP access
includes the DM system.)
Default Value:
Range:
WEB Access Specifies if access to the Web-based management system is allowed and only to those
on the list.
Default Value:
Range:
Allowed Source Specifies up to 10 user-assigned host IP addresses that are allowed Telnet access to the
IP Address management systems.
Default Value:
Range:
Allowed Source Specifies up to 10 user-assigned allowed source address masks. The remote IP address
Mask is masked with the Allowed Source Mask and, if the resulting value equals the Allowed
Source IP address, the connection is allowed.
For example, a connection would be allowed with the following settings:
Remote IP address = 192.0.1.5
Allowed Source IP Address = 192.0.1.0
Allowed Source Mask = 255.255.255.0
Default Value:
Range:
208700-C
Access: Enabled; Use List: Yes
Access: Enabled, Disabled; Use List: Yes, No
Access: Enabled; Use List: Yes
Access: Enabled, Disabled; Use List: Yes, No
Access: Enabled; Use List: Yes
Access: Enabled, Disabled; Use List: Yes, No
0.0.0.0 (no IP address assigned)
Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, separated by a decimal point
0.0.0.0 (no IP mask assigned)
Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, separated by a decimal point