Figure 31 Vlan Configuration Screen Example - Nortel business policy switch 2000 User Manual

124 Chapter 2 Network configuration
Ports 2, 4, 6, 8, 10, and 11 are now untagged members of VLAN 3 as shown in
Figure 29

Figure 31 VLAN Configuration screen example

Create VLAN:
Delete VLAN:
VLAN Name:
Management VLAN: [ Yes ] Now: 1
IVL/SVL:
1-6
-------
Unit #1 -U-U-U
KEY: T = Tagged Port Member, U = Untagged Port Member, - = Not a Member of
VLAN
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
To configure the PVID (port VLAN identifier) for port 8:
1
From the VLAN Configuration screen, press [Ctrl]-R to return to the VLAN
Configuration Menu.
2 From the VLAN Configuration Menu, select VLAN Port Configuration
(or press c).
The default VLAN Port Configuration screen opens
The VLAN Port Configuration screen settings shown in
settings.
208700-C
on page 122.
VLAN Configuration
[ 3 ]
[ ]
[test VLAN ]
[ IVL ]
Port Membership
7-12 13-18
------ ------
-U-UU ------
Vlan Type:
Protocol Id (PID): [
User-Defined PID:
VLAN State:
19-24
------
------
Press Ctrl-C to return to Main Me
[ Port-Based ]
None ]
[ 0x0000 ]
[ Active ]
(Figure 32).
Figure 32 are default