Figure 78 Multilink Trunk Utilization Screen (2 Of 2); Table 33 Multilink Trunk Utilization Screen Fields - Nortel business policy switch 2000 User Manual

220 Chapter 3 Using the console interface

Figure 78 MultiLink Trunk Utilization screen (2 of 2)

Trunk Traffic Type
----- -------------
5 [ Rx and Tx ]
6 [ Rx and Tx ]
[ Rx and Tx ]
[ Rx and Tx ]
[ Rx and Tx ]
Press Ctrl-P to display utilization for trunks 1-4.
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Table 33

Table 33 MultiLink Trunk Utilization screen fields

Field
Trunk
Traffic Type
Unit/Port
Last 5 Minutes
208700-C
MultiLink Trunk Utilization
Unit/Port
---------
8/22
8/23
3/2
1/2
7/2
5/6
describes the MultiLink Trunk Utilization screen fields.
Description
Column header for the read-only fields in this screen. The read-only data displayed in
this column indicates the trunk (1 to 6) that corresponds to the switch ports specified
in the Port field.
Allows you to choose the traffic type to be monitored for percent of bandwidth
utilization (see Range).
Default Value Rx and Tx
Range Rx and Tx, Rx, Tx
Lists the trunk member ports that correspond to the trunk specified in the Trunk
column. The (Unit/) extension to the Port column name only appears when the switch
(unit) is part of a stack configuration. It indicates that the ports in this row are
associated with the specified unit number configured in the Unit field.
This read-only field indicates the percentage of packets (of the type specified in the
Traffic Type field) utilized by the port in the last 5 minutes. This field provides a
running average of network activity and is updated every 15 seconds.
Last 5 Minutes Last 30 Minutes
-------------- ---------------
45.0%
55.0%
65.0%
45.0%
25.0%
75.0%
Press Ctrl-C to return to Main Menu.
Last Hour
--------
35.0% 50.0%
25.0% 70.0%
30.0% 55.0%
50.0% 35.0%
40.0% 50.0%
80.0% 55.0%