Port List Syntax; Figure 63 Mac Address Security Port Lists Screen; Table 19 Mac Address Security Port Lists Screen Fields - Nortel business policy switch 2000 User Manual

186 Chapter 3 Using the console interface

Figure 63 MAC Address Security Port Lists screen

Entry
-----
S1
S2
S3
S4
S5
S6
S7
Press Ctrl-N to display next screen.
Enter unit/port, "1/NONE", "1/ALL", "2/3,4/7-9".
when done. Press Ctrl-R to return to previous menu.
to Main Menu.
Table 19

Table 19 MAC Address Security Port Lists screen fields

Field
Entry
Port List

Port list syntax

When you enter a port list in a stack configuration, you must specify either a unit/
port list, NONE, or ALL. In a stack configuration, ALL indicates all of the stack
port; whereas, in a standalone scenario, ALL indicates all of the switch ports.
208700-C
MAC Address Security Port Lists
Port List
---------
[ 1/1-7,2/1-7,2/9,3/1-4,4/12 ]
[ 2/1-7,2/9,4/3-5 ]
[ 1/3,2/7,3/1-4 ]
[ 4/12 ]
[ 1/NONE,2/NONE,3/NONE,4/NONE ]
[ 1/ALL,2/ALL,3/ALL,4/ALL ]
[ 3/ALL ]
describes the MAC Address Security Port Lists screen fields.
Description
This field indicates the port list number (S1 to S32) that corresponds to the
values you set in the Port List field.
This field allows you to create a port list that you can use as an "Allowed
Source" in the MAC Address Security Table screen.
Note: NONE and ALL must be entered in uppercase characters as
shown in the screen prompt.
More...
PortT
Press <Return> or <Enter>
Press Ctrl-C to return