Table of Contents
Advertisement
270 Chapter 3 Using the console interface
2
In the BPS 2000 Image Filename field, enter the name of the BPS 2000 image
file.
3
In the TFTP Server IP Address, enter the IP address of your TFTP load host.
4
Use the space bar to toggle to BPS 2000 Image in the Start TFTP Load of
New Image field.
5
Press [Enter].
The system resets and opens to the BPS2000 banner.
6
Press [Ctrl + Y] to access the main menu.
7
Choose Software Download (or press f) from the main menu.
The Software Download screen appears
8
In the BPS 2000 Diagnostics Filename field, enter the name of the BPS 2000
diags file.
9
In the TFTP Server IP Address, enter the IP address of your TFTP load host.
10 Use the space bar to toggle to BPS 2000 Diagnostics in the Start TFTP Load
of New Image field.
11 Press [Enter].
The system resets and opens to the BPS2000 banner.
12 Press [Ctrl + Y] to access the main menu.
However, if you are currently using software version 1.0, 1.0.1, or 1.1, you must
upgrade to software version 1.1.1 before upgrading to version 2.0.
Upgrading software in a Hybrid stack
The physical order of the units and the unit numbering in the Hybrid stack does
not affect the upgrading process at all. In addition, the cabling order regarding
upstream/downstream neighbors does not affect the process.
208700-C
(Figure
96).
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
