Address-Based Mirroring Configuration; Figure 48 Address-Based Mirroring Configuration Example - Nortel business policy switch 2000 User Manual

Address-based mirroring configuration

Figure 48
port 23, the designated monitor port for Switch S1, is monitoring traffic occurring
between address A and address B.

Figure 48 Address-based mirroring configuration example

Address A
F
S2
In this configuration, the designated monitor port (port 23) can be set to monitor
traffic in any of the following modes:
• Monitor all traffic transmitted from address A to any address.
• Monitor all traffic received by address A from any address.
• Monitor all traffic received by or transmitted by address A.
• Monitor all traffic transmitted by address A to address B.
shows an example of an address-based mirroring configuration where
S1
T1
F
S3
Chapter 2 Network configuration 149
StackProbe Monitor port
T2
Address B
Using the Business Policy Switch 2000 Version 2.0
(port 23)
BS45033A