Nortel business policy switch 2000 User Manual page 83

• VLAN membership attributes
— Tunnel-Type: value 13, Tunnel-Type-VLAN
— Tunnel-Medium-Type: value 6, Tunnel-Medium-Type-802
— Tunnel-Private-Group-Id: ASCII value 1 to 4094 (this value is used to
identify the specified VLAN)
• Port priority (vendor-specific) attributes
— Vendor Id: value 562, Nortel Networks vendor Id
— Attribute Number: value 1, Port Priority
— Attribute Value: value 0 (zero) to 7 (this value is used to indicate the port
priority value assigned to the specified user)
System requirements
The following are minimum system requirements for the EAPOL-based security
feature:
• At least one of the following supported switches:
— BayStack 350/410-24T/450 switch (software version V4.0, or later)
— Business Policy Switch 2000 (software version V1.1, or later)
• RADIUS server (Microsoft Windows XP Server)
• Client software that supports EAPOL (Microsoft Windows XP Client)
You must specify the Microsoft 2001 IAS server (or any generic RADIUS server
that supports EAP) as the primary RADIUS server for these devices.
You must also configure your BayStack 350/410-24T/450 switches and BPS 2000
for port-based VLANs and EAPOL security. (For information on configuring the
BPS 2000, refer to the Chapter 3, Using Web-based Management for the Business
Policy Switch 2000 Software Version 2.0, Reference for the Business Policy
Switch 2000 Management Software Version 2.0, and Reference for the Business
Policy Switch 2000 Command Line Interface Software Version 2.0. For
information on configuring the BayStack switches, go to
www.nortelnetworks.com/documentation
down to the documentation you need.)
Chapter 1 The Business Policy Switch 2000 83
on the Web, and find the switch. Scroll
Using the Business Policy Switch 2000 Version 2.0