Mac Address Security Configuration Menu Screen - Nortel business policy switch 2000 User Manual

176 Chapter 3 Using the console interface
Table 15 MAC Address Table screen fields (continued)
Field
Find an Address
Select VLAN ID
Number of addresses

MAC Address Security Configuration Menu screen

The MAC Address Security Configuration Menu screen
specify a range of system responses to unauthorized network access to your
switch. The system response can range from sending a trap to disabling the port.
The network access control is based on the MAC addresses of the authorized
stations. You can specify a list of up to 448 MAC addresses that are authorized to
access the switch. You can also specify the ports that each MAC address is
allowed to access. The options for allowed port access include: NONE, ALL, and
single or multiple ports that are specified in a list, for example, 1-4, 6, 9, etc. You
must also include the MAC address of any router connected to any secure ports.
In addition, with software version 2.0, you can configure the BPS 2000 to drop all
packets with specified MAC destination addresses (DA). You can enter up to 10
specific MAC DAs you want filtered. The packet with the specified MAC DA will
be dropped regardless of the ingress port, source address (SA) intrusion, or VLAN
membership.
208700-C
Description
Allows the user to search for a specific MAC address.
Default Value 00-00-00-00-00-00 (no MAC address assigned)
Range 00-00-00-00-00-00 to FF-FF-FF-FF-FF-FF
Enter the VLAN ID number you want to display the MAC addresses for.
Default Value 1
Range 1-4094
Displays the total number of MAC addresses currently learned by the
specified VLAN. This number updates dynamically when you press [Ctrl]-P or
[Ctrl]-N to scroll through the list.
Note: You must use either the Web-based management system or the
CLI to configure MAC DA filtering. Also, this feature is available only
on BPS2000 software version 2.0 or higher.
(Figure 58) allows you to