Multilink Trunk Utilization Screen; Figure 77 Multilink Trunk Utilization Screen (1 Of 2) - Nortel business policy switch 2000 User Manual

MultiLink Trunk Utilization screen

The MultiLink Trunk Utilization screen
monitor the percentage of bandwidth used by configured trunk members. You can
choose the type of traffic to monitor.
Figure 77
ports. Because two screens are necessary to show all of the configured trunks (up
to six), the screen prompts you to Press [Ctrl]-N to view trunks five and six.
➨
Choose MultiLink Trunk Utilization (or press u) from the MultiLink Trunk
Configuration Menu screen to open the MultiLink Trunk Utilization screen.

Figure 77 MultiLink Trunk Utilization screen (1 of 2)

Trunk Traffic Type
----- -------------
1 [ Rx and Tx ]
2 [ Rx and Tx ]
3 [ Rx and Tx ]
4 [ Rx and Tx ]
Press Ctrl-N to display utilization for trunks 5-6.
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
shows an example of bandwidth utilization rates for trunk member
MultiLink Trunk Utilization
Unit/Port Last 5 Minutes
--------- --------------
3/6
3/7
3/9
3/17
4/25
4/26
6/13
6/14
5/19
5/20
Using the Business Policy Switch 2000 Version 2.0
Chapter 3 Using the console interface 219
(Figure 77 and
Last 30 Minutes
---------------
90.0%
20.0%
35.0%
85.0%
45.0%
25.0%
35.0%
30.0%
40.0%
25.0%
Press Ctrl-C to return to Main Menu.
Figure 78) allows you to
Last Hour
---------
70.0% 90.0%
55.0% 80.0%
45.0% 45.0%
35.0% 20.0%
45.0% 50.0%
70.0% 35.0%
35.0% 50.0%
80.0% 70.0%
35.0% 75.0%
70.0% 85 0%
More...