Table 52 Configuration File Download/Upload Screen Fields - Nortel business policy switch 2000 User Manual

Table 52 Configuration File Download/Upload screen fields

Field
Configuration Image
Filename
TFTP Server IP Address
Copy Configuration
Image to Server
Retrieve Configuration
Image from Server
Description
The file name you have chosen for the configuration file. Choose a meaningful
file name that will allow you to identify the file for retrieval when required. The
file must already exist on your TFTP server and must be read/write enabled.
Default Value Zero-length string
Range An ASCII string of up to 30 printable characters
The IP address of your TFTP load host.
Default Value 0.0.0.0 (no IP address assigned)
Range Four-octet dotted-decimal notation, where each octet is
represented as a decimal value, separated by a decimal
point
Specifies whether to copy the presently configured switch/stack parameters to
the specified TFTP server (default is No).
Use the spacebar to toggle the selection to Yes.
Press [Enter] to initiate the process.
Default Value No
Range Yes, No
Specifies whether to retrieve the stored switch/stack configuration parameters
from the specified TFTP server (default is No). If you choose Yes, the
download process begins immediately and, when completed, causes the
switch/stack to reset with the new configuration parameters.
Use the spacebar to toggle the selection to Yes.
Press [Enter] to initiate the process.
Default Value No
Range Yes, No
Using the Business Policy Switch 2000 Version 2.0
Chapter 3 Using the console interface 277