3. Connect to the NVR
There are various ways you can connect to the NVR and below are the
suggested methods for different network setup:
.
The NVR is placed in a network with a DHCP serv er: Connect to the NVR
by using "Device Search" Utility.
.
The NVR is placed in a network without DHCP serv er (or you are
connecting to it directly): Access NVR with its default IP (192.168.0.20).
3.1 Use Device Search Utility
If the NVR is placed in a corpor ate network or a local area netw ork where a
DHCP server is already presented, please install the "Device Search" utility from
the bundled CD disk.
To begin, launch the "Device Se arch" utility from the CD and proceed with the
installation.