Status; Show; Write - Planet GRT-101 User Manual

PLANET Technology Corp.
reboot
ping
admin
utility
exit

3.4.4 Status

You can view running system status of SHDSL, WAN, route and interface via
status command.
Move cursor " >> " to status and press enter.
>> shdsl
wan
route
interface

3.4.5 Show

You can view the system information; configuration and configuration in
command script by show command.
Move cursor " >> " to show and press enter.
>> system
config
script

3.4.6 Write

For any changes of configuration, you must write the new configuration to
EPROM using write command and reboot GRT-101/GRT-401 to take affect.
Move cursor to " >> " to write and press enter.
----------------------------------------------------------------------
Command: write <CR>
Message: Please input the following information.
Are you sure? (y/n): y
----------------------------------------------------------------------
Reset and boot system
Packet internet groper command
Setup management features
TFTP upgrade utility
Quit system
Show SHDSL status
Show WAN interface status
Show routing table
Show interface statistics status
Show general information
Show all configuration
Show all configuration in command script
GRT-101/401 User's Manual
- - 38