Using The Key Operator Programs - Sharp SF-2540 Operation Manual

AUDIT CLEAR
0
1
4
7
AUDIT CLEAR
0
ISPLAY
MATION
CLEAR ALL
3
6
Downloaded From ManualsPrinter.com Manuals
C
INTERRUPT
2 3
5 6
S
8
9
C
START
KEY OPERATOR PROGRAMS

Using the key operator programs

Press the clear (
1
the clear key again.
The following message will appear.
ENTER KEY OPERATOR CODE.
Enter the key operator code number.
2
The dashes in the message will change to asterisks. If the
entered code number is correct, a "P" will appear in the copy
quantity display.
Enter the desired 2-digit program code number and
3
press the START key.
If a mistake is made during entry, press the clear key to clear
the entry.
The message display will show the number and name of the
program.
In some programs, the current setting will be displayed or
highlighted in the message display.
4
Follow instructions for the program.
When all steps for the program have been completed or when
the PROGRAM key is pressed to exit the program, a "P" will
appear in the copy quantity display so that another program
can be selected.
To exit the key operator program mode, press the
5
CLEAR ALL key.
) key, the INTERRUPT key, and
–––––
81