Table of Contents
Advertisement
ERASE
SCROLL DISPLAY
INFORMATION
1
4
7
AUDIT CLEAR
0
START
9
16
Downloaded From ManualsPrinter.com Manuals
3
4
2
3
6
5
S
8
9
C
5
If you want to change the erase mode, press the
SCROLL DISPLAY key.
The following message will appear.
ERASE
USE 10-KEY PAD TO SELECT ERASE MODE.
EDGE
CENTER
ERASE
ERASE
:PRESS 1
:PRESS 2
If a MARGIN SHIFT mode is used together with an ERASE
mode, a selection display for the MARGIN SHIFT and ERASE
modes will appear. Press 2 on the 10-key pad to select
ERASE.
Select the desired erase mode using the 10-key pad.
The selected erase mode will return to the initial setting when
the ERASE key is pressed again.
Make all other desired copier selections and press the
START key.
The ERASE feature will work only when standard size copy
paper is used.
When using the document glass, the area to be erased is
simply a specified portion of the copy paper. By repositioning
the original, the portion of it which falls within the area to be
erased can be shifted.
When using an optional document feeder, the original is
always fed to the same position on the document glass, so the
area to be erased is fixed.
EDGE ERASE
CENTER ERASE
EDGE+CENTER
ERASE
:PRESS 3
Advertisement
Chapters
Table of Contents
