Sharp SF-2540 Operation Manual page 85

P14 Account Number Control
Program P14 is used to register accounts, delete accounts, change
an account number, or display all account numbers.
When P14 is entered, the following message will appear.
Downloaded From ManualsPrinter.com Manuals
KEY OPERATOR PROGRAMS
To reset all accounts
Press key 1.
To reset a single account
1. Press key 2.
The following message will appear.
INPUT ACCOUNT NUMBER TO BE RESET
AND PRESS THE START KEY.
2. Enter the account number to be reset.
3. Press the START key.
4. Continue with steps 2 and 3 for other account num-
bers. Press the PROGRAM key to exit the program.
P14: ACCOUNT NUMBER CONTROL.
1.ENTER 2.DELETE 3.CHANGE 4.DISPLAY
To register accounts
1. Press key 1.
The following message will appear.
INPUT ACCOUNT NUMBER TO BE REGISTERED
AND PRESS THE START KEY.
2. Enter a 5-digit account number.
3. Press the START key.
If a number that is already registered is entered, the message
"THIS NUMBER IS ALREADY USED." will appear. Another
number must be chosen.
4. To enter other account numbers, repeat steps 2 and 3.
Press the PROGRAM key to exit the program.
–––––
–––––
83