Adding Toner - Sharp SF-2540 Operation Manual

ADDING TONER

The message "TONER SUPPLY IS LOW. PRESS THE
FOR INSTRUCTIONS." will appear in the message display before
the toner supply is completely empty. If copying is continued, copies
will gradually become lighter until the copier stops and the message
display changes to "ADD TONER. PRESS THE
INSTRUCTIONS ON HOW TO ADD TONER.", indicating that the
toner supply is empty. Toner can be added any time after the
message "TONER SUPPLY IS LOW. PRESS THE
INSTRUCTIONS." appears. To add toner, stop the copier and
proceed as below. When either of these messages appears, you can
use the INFORMATION and SCROLL DISPLAY keys for detailed
information as necessary.
During long copy runs of multiple dark originals, "TONER RE-
PLENISHMENT IN PROGRESS." will appear and the copier will stop
making copies even though toner is left.
After a sufficient amount of toner has been fed, the START key
indicator will light up. Press the START key to resume copying.
26
Downloaded From ManualsPrinter.com Manuals
KEY
KEY FOR
KEY FOR
Open the front cover.
1
2 Pull down the toner hopper lock lever and pull the toner
hopper out slowly until it stops.
Hold the toner cartridge vertically and vigorously shake
3
it up and down about 20 times to loosen the toner. This
will allow the toner to flow more easily into the toner
hopper.
For best copying results, be sure to use
only Sharp products.
The package of Sharp toner has the
Genuine Supplies label.