Table of Contents
Advertisement
P90 Display the List of All P Codes
Program P90 is used to sequentially display all programs.
The programs in which the setting has been changed from the
factory default setting are indicated with
When P90 is entered, the following message will appear.
If an optional Card Counter (SF-EA11) or Auditor (SF-EA12) is
installed, programs 10, 11, 13, 14, 16 and 18 will not be displayed.
Downloaded From ManualsPrinter.com Manuals
.
P90: DISPLAY THE LIST OF ALL P CODES.
TO SCROLL DISPLAY: PRESS
RUN AN INDICATED PROGRAM: PRESS START.
P10:AUDITING MODE.
P11:NUMBER OF COPIES PER
ACCOUNT.
P13:RESETTING ACCOUNT.
P14:ACCOUNT NUMBER CONTROL.
P16:ACCOUNT LIMIT SETTING.
1.
Press the SCROLL DISPLAY key to advance through
the list of programs.
Each additional press of the SCROLL DISPLAY key will
advance the message display through the list of programs
starting with P10.
2.
To enter a program, highlight it and press the START
key.
3.
Press the PROGRAM key to exit the program.
KEY OPERATOR PROGRAMS
KEY. TO
97
Advertisement
Chapters
Table of Contents
