Interior - Sharp SF-2540 Operation Manual

Interior

!8 Fusing unit
The fusing unit is hot. Exercise care in this area.
!9 Transport lever
Turn to open the transport section.
@0 Corona unit
The unit is used to charge the photoconductive
drum.
@1 Photoconductive drum
Copy images are formed on the photoconductive
drum.
@2 Toner hopper
Contains toner.
@3 Roller rotating knobs
Turn to remove misfed paper.
@4 Toner hopper lock lever
Pull down to release the toner hopper.
Downloaded From ManualsPrinter.com Manuals
PART NAMES AND FUNCTIONS
@5 Toner collecting container
Used toner is collected here. Replace when a
message appears in the display indicating the
need to do so.
Accessories
Inner cassette
(installed in the lower paper tray) ................... 1
Exit tray .......................................................... 1
Operation manual .......................................... 1
Document tray* .............................................. 1
Toner collecting containers
(including 1 pre-installed at the factory) ......... 4
*Not included in some areas.
39