Key Operator Programs - Sharp AR-405 Operation Manual

KEY OPERATOR PROGRAMS

A complete list of all key operator programs is provided below. These programs can
only be accessed by first entering the key operator code number.
The key operator programs are grouped into four categories: account control, other
function settings, timer settings, and enable/disable settings.
Category
Account Control
Other Function
Settings
8-4
Program Name Function
Auditing Mode Enables or disables the basic auditing mode, which
controls access to copier.
Number of Copies Displays the total number of copies made against
per Account account numbers.
Resetting Account Resets all audit accounts or selectively resets
individual accounts.
Account Number Registers accounts, deletes accounts, changes an
Control account number, or prints all registered account
numbers.
Account Limit Sets the maximum number of copies which can be
Setting made against a registered account number.
Account Number Guards against trial and error entering of audit
Security account numbers.
Key Operator Code Changes the key operator code number.
Number Change
Exposure Lightens or darkens copies in the automatic
Adjustment exposure mode.
Add or Change Adds or changes reduction and enlargement preset
Extra Preset Ratios copy ratios.
Setting a Maximum Sets the maximum number of copies that can be
Number of Copies selected.
Initial Margin Shift Sets the initial margin shift values.
Setting
Erase Width Sets the initial amount of the erase area.
Adjustment
Initial Status Sets the copier's initial settings in the ready
Setting condition.
Stream Feeding Enables the stream feeding mode for copying
Mode from the document feeder.
Staple Position Sets the initial stapling position setting for an optional
Setting finisher (AR-FN1N only).
Page No.
8-9
8-9
8-10
8-10
8-12
8-13
8-14
8-14
8-15
8-15
8-16
8-16
8-17
8-17
8-18