Key Operator Programs - Sharp SF-2540 Operation Manual

KEY OPERATOR PROGRAMS

A complete list of all key operator programs is provided below. These programs can
only be accessed by first entering the key operator code number.
If an optional Card Counter (SF-EA11) or Auditor (SF-EA12) is installed, key operator
programs 10, 11, 13, 14, 16 and 18 cannot be accessed by way of the copier keys. In
this case, settings for the auditing programs must be selected by using an optional
Counter Commander (SF-EA13). The operation of the SF-EA11, SF-EA12, and SF-
EA13 auditing system is described in a separate manual.
Program
Code No. Program Name
P10
P11
P13
P14
P16
P18
P19
P20
P21
P22
P23
P24
P25
P26
P27
P28
P29
Function
Auditing Mode Enables or disables the basic auditing mode, which
controls access to copier.
Number of Copies Displays the total number of copies made against
per Account account numbers.
Resetting Account Resets all audit accounts or selectively resets
individual accounts.
Account Number Registers accounts, deletes accounts, changes an
Control account number, or displays all registered account
numbers.
Account Limit Sets the maximum number of copies which can be
Setting made against a registered account number.
Account Number Guards against trial and error entering of audit
Security account numbers.
Key Operator Code Changes the key operator code number.
Number Change
Auto Exposure Lightens or darkens copies in the automatic
Adjust exposure mode.
Auto Power Sets a time interval after which the copier
Shut-off Timer automatically turns off.
Toner Save Mode Reduces toner consumption.
Auto Clear Setting Sets a time interval after which the copier returns
to the initial settings.
Add or Change Adds or changes a reduction or enlargement
Extra Preset Ratio preset copy ratio.
Setting a Maximum Sets the maximum number of copies that can be
Number of Copies selected.
Initial Margin Shift Sets the initial margin shift values.
Setting
Erase Width Sets the amount of the erase area.
Adjustment
Initial Status Sets the copier's initial settings in the ready
Setting condition.
Total Copy Count Recalls the total copy counts of the copier,
document feeder, duplex module, and stapler.
KEY OPERATOR PROGRAMS
Page
No.
82
82
82
83
85
86
87
87
87
87
88
88
89
89
89
90
90
79