Automatic Reduction/Enlargement - Sharp SF-2540 Operation Manual

RADF (SF-A58)

Automatic reduction/enlargement

Reduction and enlargement ratios can be selected automatically
with the AUTO IMAGE key.
COPY RATIO
1 0 0 %
EXPOSURE
AUTO
EXPOSURE LIGHT
AUTO
MANUAL
PHOTO
AUTO
O COPY
IMAGE
)
UMBER
ZOOM
UMBER
1 2
4 5
7 8
AUDIT CLEAR
0 C
54
Downloaded From ManualsPrinter.com Manuals
1
2
ORIGINAL
A4
1. A4
2. A3
DARK TRAY SELECT
3
4
3
START
6
5
9
Adjust the original guides to the size of the originals
and set the originals face up in the document feeder
tray.
The original size will be detected and indicated in the message
display.
Use the TRAY SELECT key to select the paper tray with
the desired paper size.
NOTE:
This feature will not work when original or copy paper is of non-
standard size.
Press the AUTO IMAGE key.
The best reduction or enlargement ratio for the selected paper
size will be automatically set.
If the size and orientation of the original do not correspond to
standard reduction/enlargement ratios for the selected paper
tray, then the following message will appear to indicate how
the original should be placed.
°
ROTATE ORIGINAL 90
Enter the desired number of copies.
Press the START key.
To cancel the automatic reduction/enlargement mode, press
the 100% key.
FROM TO .