Loading Copy Paper - Sharp SF-2540 Operation Manual

PAPER

Loading copy paper

"OPEN TRAY AND ADD PAPER." will be displayed
when there is no copy paper in a selected paper feed
station.
When a selected paper tray is not installed or is
improperly installed, "PUSH PAPER TRAY
THE MACHINE UNTIL IT LATCHES." will be
displayed. Install it or push it back firmly into place.
For best results, use only Sharp recommended paper.
The copy paper size for the 500-sheet paper drawer
will be set by Sharp service personnel according to
your request when you purchase the copier. If a
Maximum height line
24
Downloaded From ManualsPrinter.com Manuals
different paper size setting is required, contact your
authorised Sharp Service Centre.
The 500-sheet paper drawer can be adjusted for
following paper sizes: A4, A4R, B4, A3, and 8-1/2" x
11" (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17",
INTO
and A4).
In some regions, the drawer can be adjusted to 216
mm x 330 mm (8-1/2" x 13").
The paper size for the lower paper tray can be
changed by the user.
500-sheet paper drawer
1 Gently lift and pull out the paper tray.
Fan the copy paper and insert it into the tray.
2
The tray holds 500 sheets of paper.
Do not load paper above the maximum height line.
3 Push the paper tray firmly back into the copier.