Misfeed Removal - Sharp SF-2540 Operation Manual

STAND/3000-SHEET PAPER DRAWER (SF-D23)/STAND/500-SHEET PAPER DRAWER (SF-D24)

Misfeed removal

A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS THE
INSTRUCTIONS.
SF-D24
74
Downloaded From ManualsPrinter.com Manuals
KEY FOR RECOVERY
1
SF-D23
2
3
The copier will stop when a misfeed occurs.
The message "A MISFEED HAS OCCURRED. CLEAR INDICATED
AREA. PRESS THE
will appear with a display of paper misfeed locations. Press the
INFORMATION and SCROLL DISPLAY key for more detailed
information as necessary.
Open the side cover and remove any misfed paper.
Be sure to perform this step before pulling out either of the
paper drawers. If not, the paper may be torn as a drawer is
opened.
Be sure not to tear the misfed paper during removal.
SF-D23
If possible, remove the misfed paper by pulling upward on it as
shown in the illustration.
However, if the misfed paper has traveled well into the upper
paper feed area, pull the paper downward.
Gently lift and pull out the paper drawer. Remove any
misfed paper.
Be careful not to tear the misfed paper during removal.
Make sure that paper in the tray is still properly in place.
f STAND/3000-SHEET PAPER DRAWER (SF-D23)
f STAND/500-SHEET PAPER DRAWER (SF-D24)
Close the paper drawer and the side cover.
Confirm that the misfeed display is cleared.
KEY FOR RECOVERY INSTRUCTIOS."