Table of Contents
Advertisement
MISFEED REMOVAL
Exit area cover
Roller rotating knob
Fusing unit tab
34
Downloaded From ManualsPrinter.com Manuals
3
If the misfed paper is in the exit area, open the exit area
cover carefully.
Open the cover by pulling the lever up. Support it until fully
open.
If an optional sorter is installed, slide it away from the copier
and then open the cover.
Turn the roller rotating knob in the direction of the
4
arrow and remove the paper.
If the misfed paper is deep in the fusing unit, lift the fusing unit
tab and remove any misfed paper.
CAUTION
The fusing unit is hot! Be sure to touch only the green tab or the
green roller rotating knob.
5
Close the exit area cover.
6
Close the front cover.
Confirm that the misfeed display is cleared.
Advertisement
Chapters
Table of Contents
