Staple Sort (Sf-S56 Only) - Sharp SF-2540 Operation Manual

Staple sort (SF-S56 only)

The STAPLE SORT mode staples copies of A4, A4R, B4, A3, and
8-1/2" x 11" (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17", and
A4) sizes. For other paper sizes, use the manual stapling mode. See
page 63.
SORT
STAPLE
SORT
GROUP
1
2
4 5
8
7
AUDIT CLEAR
0 C
Downloaded From ManualsPrinter.com Manuals
Stapling location
IMAG
(ORIGINALS)
EVEN NUMBER
ZOO
ODD NUMBER
100
PRE-COUNT
ORIGINALS
3
START
6
9
20-BIN STAPLE SORTER (SF-S56)
Using the document glass
1 Set the original on the document glass with the corner
to be stapled to the upper right.
Copy from the last page to the first page.
If the number of copies to be delivered into each bin is more
than 50 for A4, A4R or 8-1/2" x 11" (8-1/2" x 11", 8-1/2" x 11"R
or A4) paper or 25 for B4 or A3 (8-1/2" x 14" or 11" x 17")
paper, the copies will not be stapled.
2 Press the SORTER key to select the STAPLE SORT
mode.
Make sure that there is no paper in any sort bin before
selecting the STAPLE SORT mode.
3 Set the number of copies.
Up to 20 sets can be made.
4 Press the START key.
5 When all copies are made and sorted, press the
manual staple key.
Each set of copies will be stapled.
Sets of copies containing copies of different width will not be
stapled.
61