Sharp SF-2540 Operation Manual page 82

KEY OPERATOR PROGRAMS
Program
Code No. Program Name
80
Downloaded From ManualsPrinter.com Manuals
P31 Preheat Mode
Setting
P42 Right/Left Shift
Direction Selection
P43 Erase Mode
Initial Setting
P45 Message Time
Setting
P46 Require Key
Operator Code
P47 Stream Feeding
Mode
P52 Override Sorter Bin Cancel limit control of operation in case of bin
Capacity Limit
P70 Disabling of Auto
Paper Selection
P71 Disabling of Auto
Tray Switching
P72 Prohibiting of
Manual Feed Tray
in Duplex Copy
P73 Disabling
Deletion of Job
Programs
P74 Disabling of
Document Feeder
P75 Disabling of Duplex Temporarily prevents the optional duplex system from 95
Copying
P76 Disabling of
Stapler
P77 Disabling of Covers Prevents the selection of COVERS mode.
P83 Enabling of
PC/Modem Access
P86 Disablling of Auto
Power Shut-off
Mode
P90 Display the List of
All P Codes
Function
Sets the time that elapses before the copier enters
the preheat mode after copying is completed.
Determines whether shift direction change is to be
allowed.
Selects the erase mode's initial setting.
Sets the length of time that messages are displayed.
Prevents the copier from being started by people
other than key operator.
Enables the stream feeding mode for copying
from the optional document feeder.
capacity overflow
Prevents automatic paper selection.
Prevents automatic switching between the paper
trays.
Prohibits the use of the manual feed tray during
duplex copying. (Duplex copying can be performed
when an optional duplex module is installed.)
Prevents stored programs from being replaced or
deleted.
Prevents the use of the optional document feeder
when it malfunctions.
operating when it malfunctions. Allows the use of the
copier but not the duplex system.
Prevents damage to the stapler while awaiting
repair service. (The staple sorter is optional.)
(The COVERS mode can be used when an optional
document feeder is installed.)
Provides or prevents access to key operator programs 96
through a PC/modem without key operator code entry.
Disables the auto power shut-off mode.
Sequentially displays all available programs.
Page
No.
91
91
91
92
92
92
93
93
93
94
94
94
95
95
96
97