10-Bin Staple Sorter (Sf-S54N); 20-Bin Staple Sorter (Sf-S56); 10-Bin Staple Sorter ( Sf-S54N ) 20-Bin Staple Sorter ( Sf-S56 ); Part Names - Sharp SF-2530 Operation Manual

10-BIN STAPLE SORTER ( SF-S54N )
20-BIN STAPLE SORTER ( SF-S56 )
There are two sorter modes for different copying jobs:
one sorts copies into sets matching the sequence of the
originals and the second groups copies from different
originals into separate sort bins.
The SF-S54N 10-Bin Staple Sorter and the SF-S56 20-
Bin Staple Sorter have, in addition to the above two
modes, a STAPLE SORT mode. Sorted copies can be
automatically stapled together.
The maximum allowable number of copies varies with
the selected mode.
The number of copies will be automatically reset to the
maximum number allowable for the selected mode
when copying begins if this maximum is exceeded.

PART NAMES

SF-S54N
Sort bins
CAUTION
Do not put pressure on the sorter or subject it to undue force.
Do not place your hands on the sorter during copying because the sorter moves up and down (SF-S56).
NOTES:
Sorter lock lever
Stapler cover
SF-S56
Sort bins
To install the 20-bin staple sorter (SF-S56), an
optional stand/500-sheet paper drawer (SF-D20),
stand/1000-sheet paper drawer (SF-D21) or an
equivalent stand must be installed.
The bin intervals of staple sorter SF-S54N are narrow
for space conservation. When copying from an
optional ADF or RADF is completed or the clear all
( ) key or the sorter bin access key is pressed in
the document glass mode, the bins will move three
at a time and the space between them will become
larger so that copies can be easily taken out. This
sorter bin access mode can be disabled by user
program No. 7. See page 34, USER PROGRAMS.
BIN ACCESS STAPLE
Manual staple
Bin access
key
key
Staple required indicator
Manual staple key
Stapler cover
67