20-Bin Staple Sorter (Sf-S53N) 20-Bin Staple Sorter (Sf-S55N); Part Names - Sharp SF-2052 Operation Manual

20-BIN STAPLE SORTER (SF-S53N)
20-BIN STAPLE SORTER (SF-S55N)
There are two sorter modes for different copying jobs:
one sorts copies into sets matching the sequence of
the originals and the second groups copies from
different originals into separate sort bins.
The SF-S53N and the SF-S55N 20-Bin Staple Sorters
have, in addition to the above two modes, a STAPLE
SORT mode. Sorted copies can be automatically
stapled together.
The maximum allowable number of copies varies with
the selected mode.
The number of copies will be automatically reset to the
maximum number allowable for the selected mode
when copying begins if this maximum is exceeded.

PART NAMES

SF-S53N
Non-sort bin
Sort bins
CAUTION
Do not put pressure on the sorter or subject it to undue
force.
82
The SF-S55N 20-Bin Staple Sorter has the front
access function. If the automatic front access
function has been enabled and A4 or 8-1/2" x 11"
paper is used, the copies delivered into the sort bins
will automatically move toward the front side of the
staple sorter after copying is completed, so that
copies can be easily taken out. After the copies
move, the next copy run can be started without
taking out the copies if the copy paper size for the
next copy run is A5, A4 or 8-1/2" x 11" (5-1/2" x
8-1/2", 8-1/2" x 11" or A4).
Even if the automatic front access function has been
disabled, the copies can be moved toward the front
side by pressing the front access key on the staple
sorter.
In both cases, the number of copies per bin must not
exceed 50.
KEY OPERATOR
of the SF-S55N can be enabled or disabled. See page 123.
SF-S55N
Manual staple key
Front access
key
Non-sort bin
Stapler cover
Sort bins
The automatic front access function
Bin up key
HAND-INSERTED SORTED
A 3
A 4
A 4
B 4
Bin down key STAPLING
START/STOP key
Operation panel
Front cover
POSITION
SELECTION key
POSITION
SELECTION
A 3 B 4
STAPLING
START/STOP
A 4 R