Staple Sort - Sharp AR-281 Operation Manual

FINISHER (AR-FN1N)

Staple sort

The STAPLE SORT mode staples A4, A4R, B4, and A3 (8-1/2" x 11",
8-1/2" x 11"R, 8-1/2" x 14", and 11" x 17") size copies. Stapled sets
cannot be delivered to the top tray.
NOTE:
Different size originals cannot be copied onto copy paper of their
respective sizes in the STAPLE SORT mode. The paper size selected
for the first scanned original will be used for all originals. To copy
different size originals in the STAPLE SORT mode, select the paper
size for the largest original.
AR-281
Stapling position
AR-286/AR-336
Stapling position
READY TO COPY.(DOCUMENT FEEDER MODE)
OUTPUT
TOP TRAY
STAPLE
OFFSET
SORT SORT
TRAY
OFFSET
AUTO AUTO A4
EXPOSURE PAPER SELECT
7-6
Using the SPF/RADF
Set the originals in the document feeder tray.
1
●
If the number of copies in one set is more than 50 for
A4 or A4R (8-1/2" x 11" or 8-1/2" x 11"R) paper or 25 for B4 or
A3 (8-1/2" x 14" or 11" x 17") paper, the copies will not be sta-
pled.
●
The stapling positions shown in the left figures are the factory
default positions for the AR-281 and AR-286/AR-336.
Press the OUTPUT key.
2
AUTO
EXPOSURE
Press the "STAPLE SORT" key on the touch panel.
3
OK
GROUP
100%
COPY RATIO