Display Event Log; Figure 3-34. Event Log Screen - Nortel BayStack 350 Series Manual

Display Event Log

The Event Log screen
•
•
•
•
Choose Display Event Log from the main menu to open the Event Log screen.
Note: This screen does not refresh dynamically to show new entries. To
refresh the screen, press [Ctrl]+P.
Entry Number: 4
Connection logout, IP address: 38.227.40.8, access mode: no security.
Entry Number: 3
Connection logout, IP address: 38.227.40.8, access mode: no security.
Entry Number: 2
Successful connection from IP address: 38.227.40.8, access mode: no security.
Entry Number: 1
Software downloaded to BayStack Model 350T HW:RevC FW:V1.00 SW:V1.00.
Press Ctrl-P to see previous display. Press Ctrl-N to see more entries.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
Figure 3-34. Event Log screen
893-00992-E
(Figure
Software download: Indicates the new software version.
Authentication failure: Indicates any attempted SNMP
specified an invalid community string.
TELNET session status: Indicates various TELNET events. (For details on
configuring this feature, see
Operational exception: Indicates that the microprocessor has received an
exception at the specified vector number.
sysUpTime:
sysUpTime:
sysUpTime:
sysUpTime:
3-34) provides the following information:
"TELNET Configuration" on
Event Log
00:14:36
00:13:35
00:00:53
00:00:00
Using the Console Interface
or
get set
page 3-68.)
Reset Count: 2
Reset Count: 2
Reset Count: 2
Reset Count: 1
access that
3-79