Multilink Trunk Configuration - Nortel BayStack 350 Series Manual

MultiLink Trunk Configuration

The MultiLink Trunk Configuration Menu screen (see
select the appropriate screen to configure up to four inter-switch trunks and four
server trunks. Any combination of each configuration type (inter-switch and
server trunk) can be used to configure up to 16 trunk members on each switch).
Bandwidth utilization can be monitored for the trunk member ports within each
trunk and trunk-type.
For more information about configuring MultiLink Trunks, see "MultiLink
Trunks" on page 1-24.
Note: When a trunk is not active (Trunk Status field set to Disabled),
configuration changes do not take effect until the Trunk Status field is set to
Enabled.
Choose MultiLink Trunk Configuration (or press t) from the Switch Configuration
Menu screen to open the MultiLink Trunk Configuration Menu screen.
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Press Ctrl-R to return to previous menu.
Figure 3-17. MultiLink Trunk Configuration Menu screen
893-00992-E
MultiLink Trunk Configuration Menu
Inter-Switch Trunk Configuration...
Server Trunk Configuration...
Trunk Utilization...
Return to Switch Configuration Menu
Using the Console Interface
Figure
Press Ctrl-C to return to Main Menu.
3-17) allows you to
3-39