Replacing The Waste Ink Bottle; Disposing Of Waste Ink; U "Cleaning The Heat Shield - Epson SC-F9200 series User Manual

SC-F9200 Series User's Guide
M
Close the slider ink inlet cover.
When ink adheres to the heat shield when
refilling the ink, remove the heat shield and clean
it.
"Cleaning the Heat Shield" on page 66
U

Disposing of Waste Ink

Be sure to replace the Waste Ink Bottle when the
following message is displayed in the control panel.
❏ Prepare empty waste ink bottle.
❏ Replace waste ink bottle and press Z.
Leave the waste ink in the Waste Ink Bottle for disposal;
do not transfer it to another container.
c
Important:
Never remove the Waste Ink Bottle while the head is
being cleaning or a print operation is in progress.
Failure to observe this precaution could cause waste
ink to leak.
Waste Ink Counter
The printer uses the waste ink counter to track waste ink
and displays a message when the counter reaches the
warning level. If you follow the message instructions
and replace the Waste Ink Bottle, the waste ink counter
is cleared automatically.
Maintenance
If you replace the Waste Ink Bottle before being
prompted by a message, run the Waste Ink Counter
option in the Maintenance menu after replacement.
"The Maintenance Menu" on page 98
U
c
Important:
If you replace the Waste Ink Bottle before being
prompted by a message, always clear the waste ink
counter. Otherwise, the replacement interval for the
Waste Ink Bottle will no longer be notified correctly
from the next message.

Replacing the Waste Ink Bottle

Follow the procedure below to replace the waste ink
bottle.
Before starting this procedure, be sure to read the
following:
"Precautions regarding maintenance" on page 57
U
A
Raise the stopper.
74