Handling Media - Epson SC-F9200 series User Manual

SC-F9200 Series User's Guide

Handling Media

Note the following when handling or storing media.
Media that are in poor condition will not produce good
quality prints.
Be sure to read the documentation provided with each
type of media.
Notes on Handling
❏ Do not fold the media or damage the printable
surface.
❏ Do not touch the printable surface. Moisture and
oils from your hands can affect print quality.
❏ When handling media, hold it by both edges. We
recommend wearing cotton gloves.
❏ Keep the media dry.
❏ Packaging materials can be used to store media and
should not be thrown away.
❏ Avoid locations that are subject to direct sunlight,
excessive heat, or humidity.
❏ When not in use, media should be removed from
the printer, rewound, and inserted in its original
packaging for storage. Leaving media in the printer
for extended periods may cause it to deteriorate.
Handling Media After Printing
To maintain long lasting, high quality print results, note
the following points.
❏ Do not rub or scratch the printed surface. If they are
rubbed or scratched, the ink may peel off.
❏ Do not touch the printed surface, as this may
remove the ink.
❏ Make sure printouts are completely dry before
folding or stacking. If the printouts are stacked or
taken up without being dried sufficiently, the print
surface may be damaged.
❏ Avoid direct sunlight.
❏ To prevent discoloration, display and store prints as
instructed in the documentation supplied with the
media.
Introduction
22