Epson SC-F9200 series User Manual page 69

SC-F9200 Series User's Guide
c
Important:
❏ Epson recommends the use of genuine Epson
ink packs.
Epson cannot guarantee the quality or
reliability of nongenuine ink. The use of
non-genuine ink may cause damage that is not
covered by Epson's warranties, and under
certain circumstances, may cause erratic
printer behavior.
Information about non-genuine chip unit
status may not be displayed, and use of
non-genuine ink is recorded for possible use in
service support.
❏ Genuine Epson ink, other than those specified
here, could cause damage that is not covered by
Epson's warranties.
"Options and Consumable Products" on
U
page 111
❏ Do not place items on the ink tank or subject the
ink tank to strong impacts. The ink tank could
be detached.
Contact your dealer or Epson Support.
❏ Do not use if the High Density Black and Black
inks are mixed. When changing the type of
Black ink being used, the ink tank should only
be changed by a service engineer. Changing the
type of Black ink is provided for a fee.
Contact your dealer or Epson Support.
A
If the Check Ink Levels message is displayed on
the control panel screen, check the ink level in the
ink tank via the scale on the ink pack.
Maintenance
If the remaining ink level is greater than 70 mm
from the base of the ink tank:
We recommend continuing to use the printer
until the remaining ink level is 70 mm from the
base of the ink tank so that you can use all the ink
in a new ink pack to refill the ink tank.
If the remaining ink level is 70 mm or less:
Proceed to Step 2.
c
Important:
When the remaining ink is 70 mm or more
from the bottom of the ink tank and a message
appears stating, Refill Ink Tank, it is time to
replace the ink tank. We recommend replacing
the ink tank at this time. Replacements and
repairs will be provided for a fee.
During replacements and repairs, the ink in
the ink tank is discarded. This is necessary
because fine dirt, dust and other foreign bodies
mixed the ink in the ink tank cause the ink
tank to malfunction.
The ink tank replacement interval depends on
the usage environment and conditions.
Contact your dealer or Epson Support.
B
Lift the lock lever for the slider of the chip unit
you intend to replace.
69